Pinless Ligno-Scanner SDM with Dual-Depth   

Versatile, practical, rugged, economical: Dual-Depth - the new approach to scanning. 

The Ligno-Scanner SDM clearly outperforms most pinless meters on the market today. The meter gives species-corrected moisture readings in percent for wood and bamboo (flat and vertical grain and strand). In addition, the SDM provides two selectable measuring depths for thicker and thinner boards. The 1/4" depth works great on stacked veneers, engineered floors and whenever the surface moisture has to be measured. If measurements are taken at 1/4" and 3/4" depth, surface versus core moisture can be compared without using the slide hammer electrode. 

A scale to evaluate moisture in concrete and sheetrock is also available.  Reference scales are available for materials similar to wood, vinyl, textile, concrete, drywall and other building materials.

SALE PRICES GOOD UNTIL APRIL 1, 2010

 DESCRIPTION        

Item

List $

Special $

with Pin Meter

Ligno-Scanner SDM, 1/4" and 3/4" deep

SDM

315.00

293.00

279.00

Ligno-Scanner SD, dual depth, mainly wood

SD

289.00

268.00

259.00

Ligno-Scanner D, 3/4" deep

D

210.00

189.00

179.00

Ligno-Scanner S, 1/4" deep  

S

210.00

189.00

179.00

Specifications for Ligno-Scanner SDM

The measuring depth of a pinless meter is crucial. Moisture readings are too low, when the Scanner is placed on a work piece which is thinner than the measuring depth. Scanners never measure any deeper than the measuring depth.

The entire measuring pad has to be on a flat and smooth surface for accurate readings

.

Measuring Depth

*Corrections for Species

Range of Specific Gravity

Size of  Measuring Pad

wood

vertical, flat bamboo strand bamboo

1/4", 3/4"

1/4", 3/4"

1/4", 3/4"

71 Settings

71 Settings

4 Settings

%  for 0.3 - 1.0

% for 0.3 - 1.0

% for 1.0 - 1.3

1 5/8"x 2 5/8"

1 5/8"x 2 5/8"

1 5/8"x 2 5/8"

concrete

sheet rock, gypsum

1/4", 3/4"

1/4", 3/4"

1 Setting      1 Setting

% evaporation

% reading 0-2%

1 5/8"x 2 5/8"

2 7/8"x 3 1/4"

*Species Corrections for Ligno-Scanner SDM correlate directly to the Specific Gravity. Example: For a specific gravity of 0.57 (0.57g/cm3) set species # 57. Specific Gravity for most wood species can be found on the Internet. We also include a Species Chart with recommended settings. Ligno-Scanner SDM has different reference scales for groups of materials, similar materials should be measured with the corresponding scale. 

Measuring range: 5.4-61% dependent upon Species. Resolution of read-out: 0.1% Less accurate above Fiber Saturation Point at 30%.             

Wood temperature correction is not necessary.

1 9-V Battery for 3000 Readings, Battery included.

Size: 1/2"H x 2"L x 5"W  (for Scanner LD width is 2 7/8")      Weight: 8 ozs

Comes in a Carry Pouch with Belt Loop.

 

We suggest buying a pin meter first for its greater versatility and accuracy. As a second meter we suggest a pinless meter.

 

800-227-2105

FAX: 503/255/1430

E-mail: sales@lignomat.com

To place an order call 800-227-2105 or 503-257-8957 USA. You can obtain an Order Form by clicking here and printing the form from the screen. Fill out the form and fax to 503-255-1430 or 503-256-3844 

or send your order back to Lignomat, PO Box 30145,  Portland, OR 97294 USA.

For technical support contact us at 800-227-2105 or 503-257-8957 USA,

or send an E-mail to: sales@lignomat.com